DuraMark™-R Reflective Self-Stick Pipe Markers

Your label. Peel and stick it to a clean, dry pipe.
 Marker size
 Text height
 Fits pipe O.D.

DuraMark™-R Reflective Self-Stick Pipe Markers

$2.82
$2.82

How to install

Measure the pipe's outside diameter first. On insulated pipe, measure over the insulation, since the marker goes on the jacket.

Full install guide & ASME A13.1-2023 placement →

DuraMark™-R Reflective Self-Stick

Engineer grade reflective vinyl for clean, dry pipe and insulation jackets.

  1. Clean and dry the spot.Wipe off dust, oil and moisture. Isopropyl alcohol works well on metal pipe.
  2. Check the temperature.Apply at 50°F or warmer so the adhesive grabs.
  3. Peel and place.Peel the backing, line the legend up where it will be seen, and press it on from the center out to push out air.
  4. Rub it down firmlyacross the whole marker, especially the edges.
  5. Seal the ends with arrow tape.Wrap a band of matching arrow tape around the pipe at each end, overlapping the marker edge, with the arrows pointing with the flow.
The arrow tape bands do two jobs: they lock the marker ends down and show flow direction all the way around the pipe.

Arrow & banding tape

90 ft rolls in every ASME color. Use it to seal the ends of self-stick markers and to show flow direction.

  1. Match the marker.Use the same color scheme and the tape width for your marker size.
  2. Clean and dry the pipe,50°F or warmer.
  3. Wrap one bandaround the pipe with the arrows pointing with the flow, so the ends meet or just overlap.
  4. Press it downall the way around.
One 90 ft roll makes about 344 bands on 1" OD pipe, 172 on 2" OD, 86 on 4" OD and 57 on 6" OD. The calculator figures rolls for you.
Shop arrow tape

DESCRIPTIONS

Craftmark’s DuraMark™-R is a pipe marker system that’s the ultimate in safety. Meets ASME (ANSI) A13.1-2023 specifications 100%. Manufactured using durable indoor/outdoor engineer grade reflective vinyls with durable UV screen inks. Available in 5 stock sizes to mark pipes with outside diameter of .75” to over 10”. Craftmark sizes, color schemes and letter height all meet ASME (ANSI) A13.1 Scheme for the Identification of Piping Systems.

COMPLIANCE

• Complies 100% to ASME (ANSI) A13.1-2023 Scheme for the Identification of Piping Systems for letter size, Letter color, background color, color field width when used on size compatible piping.
• Complies with the Build America, Buy America (BABA) Act

PRODUCT HIGHLIGHTS

• Indoor / outdoor use.
• Meets ASME (ANSI) A13.1-2023 100%.
• Bright ASME conforming background colors.
• Letter height meets ASME specifications.
• Color field width meets ASME specifications.
• Matching arrow tape and banding tape available.
• Durable, premium grade, indoor/outdoor reflective vinyl.
• Rugged UV screen inks.
• Excellent adhesion to piping and insulation.
• Custom only.

OVERVIEW

• Engineer grade reflective vinyl.
• Custom legends and colors, 10 marker minimum per legend.
• Five sizes to fit pipes from .7” to 10”+.

ASME (ANSI) A13.1-2023 Color Standards

ASME (ANSI) A13.1-2023 Length of Color Field Standard

Fluid Service Background Color Text Color
Fire Quenching Fluids Safety Red White
Toxic and Corrosive Fluids Safety Orange Black
Flammable, Combustible or Oxidizing Fluids Safety Yellow Black
Steam, Steam Condensate, Boiler Feedwater or Other Hot Water Safety Gray Black
Potable, Cooling or Other Cold Water Safety Green White
Compressed Air Safety Blue White
To Be Defined By The User Safety Purple White
To Be Defined By The User Safety White Black
To Be Defined By The User Safety Brown White
To Be Defined By The User Safety Black White
Outside Diameter of Pipe Or Covering Length of Color Field Size of Letters
.7” to 1.3” 8” .5”
1.4” to 2.4” 8” .75”
2.5” to 6.7” 14” 1.25”
6.8” to 10” 24” 2.5”
10”+ 32” 3.5”

Download the 2023 charts: ASME A13.1-2023 color chart (PDF)  ·  Letter size & color field length (PDF)  ·  All industry standards

Specifications

Material Characteristics

Use & Application For marking pipe and pipe insulation indoors or outdoors with a reflective marker.
Unit of Measure Each
Unit quantity 1
trade name Craftmark DuraMark™-R
brand name Craftmark™
MATERIAL TYPE Engineer grade reflective vinyl with UV screen inks
Indoor/Outdoor Use Can be used indoors or outdoors.

Product Dimensions

Product WEIGHT

Style/Size Overall Size Height Width
1XSM .75” x 8” .75” 8”
1SM 1.5” x 8” 1.5” 8”
1 2.25” x 14” 2.25” 14”
1LG 4” x 24” 4” 24”
1XLG  4” x 32” 4” 32”
Style/Size Weight

Product Size Compatibility

Style/Size Overall Size MINIMUM OUTSIDE
PIPE DIAMETER		 MAXIMUM OUTSIDE
PIPE DIAMETER
1XSM .7” TO 1.3” .7” 1.3”
1SM 1.4” TO 2.4” 1.4” 2.4”
1 2.5” TO 6.7” 2.5” 6.7”
1LG 6.8” TO 10” 6.8” 10”
1XLG 10”+ 10” +

WARRANTY

Craftmark Pipe Marker products are sold with the understanding that the buyer will test them in actual use and determine for himself their adaptability for the intended use in a specific geographic location. Craftmark Pipe Markers warrants to the buyer that’s its products are free from defects in material and workmanship but ,limits its obligation to replacement of the product only.

This warranty is in lieu of any other warranty, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular use, and of any other obligations or liability on Craftmark Pipe Marker’s part. Under no circumstance will Craftmark Pipe Markers be liable for any loss, damage, expense or consequential damages of any kind arising in connection with the use, or inability to use Craftmark Pipe Marker products.

RELATED PRODUCTS